Schaerer Siena 1/2 Bedienungsanleitung PDF herunterladen (Seite 20)

Operation

User manual SI 2 - EN 63

Version 02 / 06.2005 / REWE www.schaerer.com

Preparing milk foam (Siena 2)

All beverages dispensed from the machine are hot!

Milk foam can be dispensed and/or added at any time.

1. Place a cup under the outlet.

2. Press the button and keep it pressed.

3. Press and hold the cappuccino/macchiato button to dispense milk

foam. "Milch" appears on the display.

4. The dispensing procedure is stopped by releasing the cappuccino/

macchiato button.

Pre-heating cups

This is recommended for smaller quantities of coffee (espresso). In addition

to the coffee mixture used and the water quality, the right temperature is

important for making good coffee.

There are two ways to pre-heat cups:

1. Place cups on the hot plate for cups (refer to the picture).

2. Rinse cup with hot water by using the hot water nozzle.

(Refer to page 61, "Preparing hot water").

Grinder settings

The grinder comes with a default setting that processes most coffee beans

optimally.

The grinder setting may only be adjusted while the grinder is in operation.

1. Using the multi-tool adjusting knob (included in the scope of delivery),

adjust the grinder setting to the desired position (see below):

• Grinder setting 1 = fine / turn clockwise

• Grinder setting 6 = coarse / turn anti-clockwise

• Default setting = grinder setting 3-4 (intermediate grinding)

When coffee is ﬁnely ground, brewing times are increased (the coffee

becomes stronger), and the volume of foam increases.

Milk

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 41 42

Keine Kommentare

Schaerer Siena 1/2 Bedienungsanleitung Seite 20